TS 500i Petrol Cut-off Machine
Innovative 3.9kW cut-off machine with electronically controlled fuel injection
Unique STIHL Injection engine technology for 350 mm cutting wheels. Easy to start; powerful torque. Fully-equipped with long-life air filter system and electronic water control. Can be operated by hand or with the FW 20 cart. Supplied with abrasive cutting wheel.
* Manufacturer's recommended retail price updated as of July 2021. The manufacturer's recommended retail prices are subject to change without notice.
The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.
|Vibration value, right m/s2 1)||2|
|Sound pressure level dB(A) 2)||98|
|Sound power level dB(A) 2)||112|
|Vibration value, left m/s2 1)||2.4|
|Tank volume l||0.72|
|Power output kW/bhp||3.9/5.3|
|Weight kg 3)||10.2|
|Sound pressure level dB(A) 4)||98.0|
|Sound power level dB(A) 4)||112.0|
|Vibration levels left/right m/s² 5)||2.4/2.0|
|Cutting wheel mm/in||350 / 14|
1) K-factor according to DIR 2006/42/EC = 2m / s ²
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) Without cutting wheel
4) Power factor according to DIR2006/42/EC=2.5(dB(A))
5) (K) factor according to Dir. 2006/42/EC = 2m/s²
STIHL Fuel injection (i)
The electronically controlled fuel injection ensures perfect running properties every time and reduces fuel consumption in comparison with tools without injection technology.
Reduced-emission engine technology
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Manual fuel pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
STIHL ElastoStart reduces the shock caused by the compression of the engine during starting. The compression shock is taken away from the user's joints and muscles through a spring or rubber element in the starter handle.
STIHL Electronic water control (A)
The electronic water control system can be operated via simple buttons while the engine is running. The water then switches on and off during cutting automatially, depending on engine speed. The water volume can be regulated by simply pressing the plus / minus buttons, ensuring optimum dust suppression at the touch of a button.
Pre-separation air filtration system
STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.
Ergonomic grip position
The modern, ergonomic design allows each user to work with an optimal grip position. The loop handle facilitates excellent cutting comfort in any working position.
Semi automatic drive belt tensioning
Light, consistent re-tensioning increases the service life of the belts and shaft bearings.
FW 20 Cart with attachment kit
The STIHL FW 20 cart turns all hand-operated STIHL cut-off machines into easily manoeuvrable cutting tools. With little effort you can now produce clean edges over long cuts, with depths accurate to a millimetre. Includes 'Quick mounting system conversion kit'.
- FW 20 cart with attachment kit for TS 410, TS 420, TS 480i, TS 500i £525.30*
Owners manuals and safety brochures