BETTER VISIBILITY. Reflective areas not only look good on your protective clothing, but also increase your safety. They mean that you will always be easy to see, even in the dark or in the forest.
CUT PROTECTION RATING 1 FOR CHAINSAWS
Cut protection clothing is classified in 4 cut protection ratings in accordance with EN ISO 11393. The cut protection rating specifies the maximum chain speed tested in accordance with standard conditions. Rating 1 corresponds to a chain speed of 20 m/s.
CUT PROTECTION BOOTS
PROTECTION WHEN WORKING WITH CHAINSAWS*. Contains special materials which are pulled out when they come into contact with the saw chain and stop the chainsaw in fractions of a second. Cut protection boots also have resistant inserts which significantly slow any possible cutting of the materials. The cut protection covers the entire forefoot with tongue, as well as the left and right shaft edges beside the tongue. The steel caps installed in the cut protection boots also help, as they can effectively block the saw chain. *Note: No personal protective equipment can provide absolute protection from injury. Nor is it a substitute for safe working practices.
STEEL TOE CAP PROTECTION
SAFETY-TESTED STEEL CAPS. The steel caps protect your feet from injury. The EN 20345 hardness test verifies the robustness of the steel caps using a 20 kg weight dropped onto the shoe from a height of 1 metre. The steel cap must reliably protect the foot in this process.
STANDARD rubber chainsaw boots
STANDARD chainsaw rubber boots.Rough tread, self cleaning, non-slip rubber profile soles. Adjustable textile shaft collar. Lightweight due to low leg height. Also suitable for larger calves. Flexband. Sole suitable for spikes. Profile on base. BS EN ISO 17249, cut resistance Class 1 (=20m/s)
