TS 420 - Compact and robust 3.2-kW cut-off saw (350mm cutting wheel)
Selection Petrol cut-off saws

TS 420

Compact and robust 3.2-kW cut-off saw (350mm cutting wheel)

General

TS 420

Long-life filter system with cyclone pre-separation makes on site maintenance unnecessary. Extremely low vibration levels (3.9m/s²). High performance engine with stratified charge system. Compact design and optimised balance for excellent cutting and guide characteristics. For use with 350mm cutting wheel. ElastoStart, primer pump and decompression valve. Bayonet filler cap for tool free opening. Can be hand held or used with the FW 20 cart. Supplied with abrasive cutting wheel. To deter theft and aid recovery all STIHL cut-off saws come with the Datatag MicroCESAR security marking system fitted as standard. For more information see http://www.cesarscheme.org/cesar-micro.html

Versions

Price

* Manufacturer's recommended retail price updated as of February 2018 The manufacturer's recommended retail prices are subject to change without notice.

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Product variations

  • TS 410 Compact and robust 3.2-kW cut-off saw (300mm/12" cutting wheel)

Technical data

TS 420

Technical data

Capacity cm3 66.7
Performance kW 3.2
Vibration value, right m/s2 1) 3.9
Sound pressure level dB(A) 2) 98
Sound power level dB(A) 2) 109
Vibration value, left m/s2 1) 3.9
Tank volume l 0.71
Sound pressure level dB(A) 3) 98.0
Sound power level dB(A) 3) 109.0
Vibration levels left/right m/s² 4) 3.9/3.9
Cutting wheel mm/in 350 / 14

1) K-factor according to DIR 2006/42/EC = 2m / s ²
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) Power factor according to DIR2006/42/EC=2.5(dB(A))
4) (K) factor according to Dir. 2006/42/EC = 2m/s²

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Features

TS 420

Standard features

  • Reduced-emission engine technology Zoom
    Reduced-emission engine technology

    2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

  • Manual fuel pump (Purger) Zoom
    Manual fuel pump (Purger)

    A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.

  • Water supply Zoom
    Water supply

    Water is supplied to the cutting wheel through the standard water connection with sprinkler system to suppress the dust produced during cutting. It is supplied to the device in such a way so as not to interfere with your work.

  • Pre-separation air filtration system Zoom
    Pre-separation air filtration system

    STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.

  • Anti-vibration system Zoom
    Anti-vibration system

    Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.

  • Ergonomic grip position Zoom
    Ergonomic grip position

    The modern, ergonomic design allows each user to work with an optimal grip position. The loop handle facilitates excellent cutting comfort in any working position.

  • Semi automatic drive belt tensioning Zoom
    Semi automatic drive belt tensioning

    Light, consistent re-tensioning increases the service life of the belts and shaft bearings.

  • Enhanced theft deterrent with Datatag Zoom
    Enhanced theft deterrent with Datatag

    STIHL fit MicroCESAR security marking system, with tamper evident warning label and unique RFID transponder, to all cut-off saws. Powered by proven Datatag technologies, this system deters theft but if the worst does happen Datatag enables police to carry out simple and immediate checks on suspected stolen cut-off saws. As an added benefit Datatag technologies can also be used by owners as an asset management tool.

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Accessories

TS 420

Accessories

    • Pressurised water container Zoom
      Pressurised water container

      This 10 litre capacity pressurised water container provides a mobile water supply and ensures clean, wet cutting without dust build up. No need for an external water connection. With recessed grip and stable base. Extended operating time on each full tank, increased working pressure and optimised water flow. Large filling funnel with cover. Pressure limit 3 bar. Comes with coupling as standard.

    Versions

    Price

    * Manufacturer's recommended retail price updated as of February 2018 The manufacturer's recommended retail prices are subject to change without notice.

    • Cutting direction indicator Zoom
      Cutting direction indicator

      Accessory for FW 20 cart.

    Versions

    Price

    * Manufacturer's recommended retail price updated as of February 2018 The manufacturer's recommended retail prices are subject to change without notice.

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Documents

Owners manuals and safety brochures

STIHL TS 410, 420 (GB) Download PDF, 3 MB

Notes:

  • STIHL and VIKING online owner’s manuals are usually for the latest versions of the machine. Your product may be a slightly older production model but the manual will still be appropriate for the relevant model number.
  • The languages ​​contained in the document are also displayed in brackets, for example (GB) = English.

Cookies on the STIHL website

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we'll assume that you are happy to receive all cookies on our STIHL website. However, if you would like to, you can change your cookie settings at any time.

OK