Positioning in the range

  TS 400
300/350mm		 TS 410
300mm		 TS 420
350mm		 TS 700
350mm
Displacement [cc] 64.1 66.7 66.7 98.5
Power output [kW] 3.2 3.2 3.2 5.0
Weight [kg] * 9.4 / 9.7 9.4 9.6 11.6
Vibrations [m/s²] 6.8 3.9 3.9 6.8
Torque, engine [Nm] 4.1 3.8 3.8 5.8
Torque, cutting wheel [Nm] 7.8 7.6 8.0 11.4
Max. cutting depth [mm] 100 / 125 100 125 125

* Weight without cutting wheel, without fuel and with water attachment


Equipment

New Features
Equipment Benefits
Long-life filter system with cyclone pre-filteration
  • Filter life increased by +20% in relation to TS 700
  • No cleaning intervals for the foam filter
  • Better protection against ingress of splashing water
Magnesium guard
  • Optimized weight and balance
  • Integrated water guide in the adjustable handle
  • Nozzles can be cleaned
  • Easy changeover from inboard to outboard mounting
2-stroke engine with stratified scavenging
  • 2-stroke engine exceeding emission standards
  • IPI ignition, low kickback with optimized characteristic for cut-off machines
AV system
  • AV values of 3.9 m/s² allow the user to work without fatigue
  • Very good guidance in a whole variety of cutting positions
  • Smooth initial and continuous cutting ensure rapid troublefree progress
Bayonet filler cap
  • Fuel tank can be opened and closed without difficulty and without requiring tools
  • Better protection against ingress of dust while refuelling
Technical improvements
  • multi-V belt
  • Covered decompression valve
  • Purger as standard equipment

Familiar Equipment Features
Equipment Benefits
ElastoStart Plus with purger and decompression valve
  • Fewer pulls on the starter rope and starting effort reduced to a minimum
Semi-automatic belt tensioning
  • Belt is easily retensioned to a uniform level, thus increasing the belt life and the service life of the shaft bearings
Expansion tank
  • Closed tank ventilation system
Water connection as standard
  • Cutting dust is suppressed when cutting stone and asphalt
Delivered in fully assembled form with composite cutting wheel enclosed
  • Cut-off machine is immediately ready for use after unpacking, fitting the cutting wheel and fuelling

Accessories and special accessories

Model Part No.
Water tank 7009 871 0024
Wheel kit 4224 007 1014
FW 20 Cart with Quick Mounting System kit TS 410/420 4224 200 0004